Rice Lake Ranger Count 3000 Series, Ohaus - Manual (Page 25)

Ranger™ Count 3000
Series EN-23
Alternate command
[Alt.CmM]
Define command character for the Print, Tare and Zero commands
Print
Set the alternate command character for Print
A to Z.
Tare
Set the alternate command character for Tare
A to Z.
Zero
Set the alternate command character for Zero.
A to Z.
End COM1, End COM2
[End]
Advance to the next menu or return to the top of the current menu.
4.8 Lock Menu
The Lock Menu is a software controlled option which can lock Menu settings to prevent
tampering. Default settings are in bold.
Reset
[reset]
Reset the Lock menu to factory defaults.
NO = no reset
YES = reset
Lock Cal
[l.CAL]
Set the status.
OFF = Calibration menu is not locked
ON = Calibration menu is locked
Lock Setup
[L.SetuP]
Set the status.
OFF = Setup menu is not locked
ON = Setup menu is locked
Lock Read
[L.read]
Set the status.
OFF = Readout menu is not locked
ON = Readout menu is locked
Lock Unit
[l.Unit]
Set the status.
OFF = Unit menu is not locked
ON = Unit menu is locked
Reset
no
, yes
Lock Cal
off
, on
Lock Setup
off
, on
Lock Read
off
, on
Lock Unit
off
, on
Lock Print
off
, on
Lock COM
off
, on
End Menu Lock Exit menu