Rice Lake SURVIVOR OTR Steel Deck User Manual
Page 15
Advertising
Load Cell Mount Installation
11
Figure 4-3. Installing 90
°
Fitting to Load Cell
5. Place the load cell link over the end of the cell and install load cell/link assembly onto the top of the
baseplate.
6. Apply anti-seize compound to threads of load cell bolts before installing. Torque load cell bolts 50 – 75
ft-lb.
Figure 4-4. Top View of Load Cell Access Area
7. Position flexcable so that a loop can be made in it and the end can be attached to the rigid conduit.
Advertising
This manual is related to the following products: