Torbal BAS Series - Manual (Page 16)

- 15 -
10.2 Extending the resolution
1. The resolution of the scale can be temporarily increased by pressing the HR key. This temporary
increase in resolution can be very useful in scales where d=e. The display resolution is increased for 5
seconds and then reverts automatically.
Note: These results are not legal for trade and cannot be sent to a printer or an external computer.
10.3 Zeroing the scale
If the display signals are out of zero condition “—“, the scale must be zeroed before weighing.
1. To zero the scales press the Ж0Е key.
22.036
- -
-------
0.00