Wwait 30.00, Cal- ------ load – Torbal BAS Series User Manual
Page 31
Advertising
- 30 -
4. The scale will perform a tare and the message “LOAD” will be displayed.
5. When the message “LOAD” is displayed, place the calibration weight on the scale’s hanging pan.
Calibration will begin automatically and “WAIT” will be displayed indicating that calibration is in
progress.
6. When finished the scale will automatically return to the weighing mode, and the calibration weight can be
removed from the pan.
-CAL-
------
LOAD
wwAIT
30.00
Advertising