Torbal BAS Series - Manual (Page 39)

- 38 -
Function Options:
LOC Off ( LOC oFF) Disables the LOC Dynamic Weighing Function
LOC On
(LOC on) Enables and Starts the LOC Dynamic Weighing Function (Weight integration
initiates automatically)
LOC Prn (LOC Prn) - Enables and Starts the LOC Dynamic Weighing Function (Weight integration is
initiated manually with the press of the Data Transfer Key
)
1. Hang a container or a hanging pan and press the T key to tare.
2. Press the MENU key, when the option “LOC” is displayed press the T key, and then select the option
“LOC On” or “LOC Prn” by press the T key once again.
3. Place the animal or the moving object on the pan. Weight integration will begin automatically. If “LOC
Prn” was selected press the data transfer key to initiate weight integration manually . While the scale
is integrating the weighing result the display flashes.
4. Final result will be automatically sent to a printer or a PC via the RS232 port. During data transmission
the word print will be displayed. The final result remains displayed for 30 seconds. To perform the next
weighing remove the animal, wait for the scale to display 0 and place the next animal on the pan.
Chapter 19: Dynamic and Animal Weighing (LOC)
-------
LOC LOC oN
0.28