Torbal BAS Series - Manual (Page 30)

- 29 -
Function Options:
CAL On ( CaL oN) Starts Quick Calibration. Recommended when calibrating with a single calibration
weight.
CAL Stp (CALSTP) Starts Stepped Calibration. Recommended when calibrating with multiple
calibration weights.
Other (other) Calibration with calibration mass not equal to the scale’ capacity.
Calibration with an external Calibration Weight should be performed if the scale exhibits erroneous readings
or periodically to assure accuracy of all weighing results. The scale should be calibrated with a high accuracy
weight equal to its maximum capacity. Before starting calibration, have the appropriate calibration weight
available.
16.1 Quick Calibration (calibrating with a single calibration weight).
1. Press the MENU key, when the option “Calib” is displayed press the T key, and then select the option
“CAL On” by press the T key once again.
2. The scale will display a full a calibration mass equal to the scales capacity i.e.”30”, and an option to select
a different calibration mass”other“. To calibrate the scale with a mass value equal to the scales capacity
press the T key when the calibration mass value is displayed (proceed to step 4). To calibrate the scale
with a mass lower than the scale’s maximum capacity, press the T when “other” is displayed (proceed to
step 3).
3. If option “other” has been selected a dashed line will be displayed indicating to manually enter the exact
value of the calibration mass used to calibrate the scale. To manually enter the calibration value, use the
following keys: the C key to increment a digit, the T key to accept and go to the next digit, the
key to
insert a decimal, and the MENU key to accept the entire setting.
To increment a digit To accept and go to
next digit
To insert a decimal To accept entered
value
Chapter 16: Calibration (CaLIb)
CaLIb
CAL oN
30 other