Torbal BAS Series - Manual (Page 50)

- 49 -
4. After setting all limit sets, select “Set-0” in order to return to weighing with the limits enabled.
5. To perform check weighing places the weigh on the Pan. The result is indicated by a dashed line located
on the left side of the display.
LOW OK HIGH
6. To disable check weighing enter the “thr” menu and select “thr Off”
7. To view the threshold limits Press the MENU key, when the option “thr” is displayed press the T key, and
then select the option “thrPrn ” by press the T key once again.
8. Current limit sets will be displayed and transmitted via the RS-232 port. To view all limits use the T key.
LOW HIGH Min
1.10 0.50 3.20
thr thrprn
3.00 1.00 0.20
set - O