Torbal BAS Series - Manual (Page 40)

- 39 -
20.1 Storing a Tare Value Manually
1. Press the MENU key, when the option “Tare” is displayed press the T key, and then select the option “Tar
Set ” by press the T key once again.
2. The scale will begin to Display tare locations. Locations marked with a dot in the upper left corner of the
LED have a stored tare value assigned. To select a tare location or overwrite a current location press the T
key when a desired location is displayed, and then select the option “Manual ” by press the T key once
again.
3. A dashed line will be displayed indicating to manually enter the Tare value. To manually enter tare value,
use the following keys: the C key to increment a digit, the T key to accept and go to the next digit, the
key to insert a decimal, and the MENU key to accept the entire setting.
To increment a digit To accept and go to
next digit
To insert a decimal To accept entered
value
4. Once a tare value has been assigned, the scale will automatically store the value in the selected memory
location and return to the weighing mode with the tare value in use.
Chapter 20: Storing Tare Values
tare tarset
tare 1 mmanual