Removing the computer cover – Dell Dimension 8100 User Manual
Page 42
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Removing the Computer Cover
A
CAUTION: Before you begin any of the procedures in this section,
follow the safety instructions on page 7.
^ NOTICE: The system board continues to receive a small amount of power
when the computer is turned off and attached to an electrical outlet. To avoid
damaging the system board, disconnect the power cable from the electrical
outlet and from the back of the computer, and then press the power button
before you remove the computer cover.
1 Turn off the computer and peripherals, and disconnect them from
their electrical outlets.
2 If a padlock is installed, remove it from the padlock ring on the back
panel.
3 Face the back of the computer and slide the outer padlock ring to the
left to unlock the cover release mechanism.
4 ^ I A d d i n g P a r t s