Removing cards – Dell Dimension 8100 User Manual
Page 52
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
card
connector
. edge
connector
■ card
6 Secure the card bracket to the computer with the screw you removed
in step 4.
7 Connect any cables that should be attached to the card.
See the documentation that came with the card for information about
the card's cable connections.
8 If you removed the AGP brace, replace it.
9 Replace the computer cover (see page 59), reconnect the computer
and peripherals to their electrical outlets, and turn them on.
10
If you installed a sound card, enter the system setup program (see
page 65), select Integrated Devices and change the setting for Sound
to Off.
Removing Cards
1 Turn off the computer and peripherals, disconnect them from their
electrical outlets, and press and release the power button to drain the
power from the computer. Wait at least 5 seconds, and then remove
the computer cover (see page 42).
5 ^ I A d d i n g P a r t s