Dell Dimension 8100 User Manual
Page 58
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
9 Connect a DC power cable to the power input connector on the back
of the drive.
power input
connector
DC power cabi
interface connector
interface cable
secondary system board
EIDE connector
10 Make sure that all cables are firmly connected. Fold cables out of the
way to provide airflow for the fan and cooling vents.
11 If the computer drive bay was previously empty, remove the
corresponding insert from the front panel.
Hold the front panel with the outside facing you. Press the ends of the
insert with your thumbs until the insert snaps free of the front panel.
5 ^ I A d d i n g P a r t s
Advertising