Rotating the power supply – Dell Dimension 8100 User Manual
Page 46
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Rotating the Power Supply
To access some of the components on the system board, you may need to
rotate the system power supply out of the way:
1 Turn off the computer and peripherals, disconnect them from their
electrical outlets, and wait at least 5 seconds. Press and release the
power button to drain the power from the computer, and then remove
the computer cover (see page 42).
2 Make sure that the power cable is disconnected from the power
receptacle on the back of the power supply.
3 Free the power supply from the securing tab by pressing the release
tab. Then rotate the power supply upward until it locks in its extended
position.
4 Press and release the power button to drain the power from the
computer.
4 ^ I A d d i n g P a r t s