Installing a card – Dell Dimension 8100 User Manual
Page 50
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Installing a Card
1 Turn off the computer and peripherals, disconnect them from their
electrical outlets, and wait at least 5 seconds. Press and release the
power button to drain the power from the computer, and then remove
the computer cover (see page 42).
2 Prepare the card for installation.
See the documentation that came with the card for information on
configuring the card, making internal connections, or otherwise
customizing it for your computer.
3 If you are installing an AGP card, remove the AGP card brace (see
)
.
5 ^ I A d d i n g P a r t s
Advertising