Dell Dimension 8100 User Manual
Page 51
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Save the serew to use when installing the eard later in this proeedure.
4 Remove the serew that seeures the slot filler braeket to the eomputer,
and remove the braeket from the eomputer.
filler bracket
CAUTION: Some network cards automatically start up the computer
when they are connected. To guard against electrical shock, be sure to
unplug your computer from its electrical outlet before installing any
cards. Verify that the standby power LED on the system board (see
page 45) is off.
5 Insert the eard’s edge eonneetor into the eard eonneetor.
If the eard is full-length, insert the eard braeket into the eard guide as
you lower the eard toward its eonneetor on the system board. Insert the
eard firmly into the eard eonneetor on the system board.
A d d i n g P a r t ^ I 5 1