Dell Dimension 8100 User Manual
Page 55
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
4 Remove the drive braeket from the eomputer drive bay you want to
use.
Squeeze together the braeket tabs that extend from eaeh side of the
drive braeket, and pull the braeket out of the bay.
bracket tabs (2)
If you are replaeing a drive already installed in the bay, diseonneet the
power and interfaee eables from the baek of the drive before removing
the braeket from the bay. Turn the drive/braeket assembly upside
down, and remove the four serews that seeure the drive to the braeket.
5 Unpaek the drive and prepare it for installation.
See the doeumentation that eame with the drive to verify that the
drive is eonfigured for your eomputer. Change any settings neeessary
for your eonfiguration.
A d d i n g P a r t ^ I 5 5