B&C Technologies EL-6 Windows - Manual (Page 23)

and can be pasted as a new cycle. To paste the cycle, select the cycle group header in which the
cycle is to be pasted. For example, if the cycle will be a Wash cycle, click on and select the Wash
header, located above all the other wash cycles. See figure 4.3 on page 20. Notice that the header,
Wash, is highlighted. Now right click on Wash and click Paste Cycle in the sub-menu. The pasted
cycle will appear as the next available cycle number at the bottom of the list of Wash cycles.
Figure 4.3: Pasting a cycle
Note: A cycle can be copied from one cycle type and pasted into another, i.e. copied
from a Prewash cycle and pasted into a Wash cycle.
4.6 Renumbering a Cycle
Cycles can be renumbered for convenience easily. Simply select the cycle to be renumbered in the
list of cycles, right click on the cycle, then select Renumber cycle from the sub-menu. Make sure
to choose a cycle number that is not in use. Any value from 1 to 99 may be selected and used. If
the cycle is already used in a program, be sure to delete the old cycle and replace it with the newly
renumbered cycle.
20