Energy saver mode, Setting the energy saver mode manually, Restoring from the energy saver mode – Canon PC-D320 User Manual
Page 18: Energy saver mode -10
1-10
Energy Saver Mode
This machine provides an energy saver function. When no operations are performed for about 5 minutes, the machine
automatically enters the energy saver mode.
• The time until the machine enters the energy saver mode can be specified in the range from 3 minutes to 30 minutes. You can also turn
off the energy saver function. (
→
• The energy saver function does not activate when the machine is in the following status:
– When printing out copies, faxes* or other pages
– When sending or receiving faxes*
– When a copy job is saved in memory or when the reserve copy or other functions are operating, or when the In Use/Memory indicator
lights up*
– When paper jams occur
– When an error code appears and the Alarm indicator flashes
– When no paper is loaded in the cassette or multi-purpose tray
– When
PRESS OK KEY
is displayed
* Only for the FAX-L400 model
■
Setting the Energy Saver Mode Manually
1
Press
Energy Saver
.
• The LCD is turned off and the Energy Saver key lights up.
• Right after the machine is restored from the energy saver mode, or right after copying finishes, wait about 2 seconds before pressing
Energy Saver
.
■
Restoring from the Energy Saver Mode
1
Press
Energy Saver
.
• The Energy Saver key goes off and the machine enters standby mode.
• The machine can be restored from the energy saver mode immediately. However, it may vary according to room temperature and
circumstances.