Canon PC-D320 - Manual (Page 9)

1-1
1
Intr
od
uction
Chapter 1
Introduction
Customer Support
Your machine is designed with the latest technology to provide trouble-free operation. If you encounter a problem with the
machine’s operation, try to solve it by using the information in Chapter 8. If you cannot solve the problem or if you think your
machine needs servicing, contact your local authorised Canon dealer or the Canon help desk.
Important Safety Instructions
Read these safety instructions thoroughly before using your machine, and keep them handy in case you need to refer to them
later.
For users of a cardiac pacemaker
• This product and the cartridge emit low level magnetic flux. If you use a cardiac pacemaker and feel abnormalities, please stay
away from this product and the cartridge, and consult your doctor.
• Do not disassemble or modify. There are high-temperature and high-voltage components inside the machine which may result
in a fire or electrical shock.
• Follow all warnings and instructions marked on the machine.
■ Location
• Do not place the machine near alcohol, paint thinner or other inflammable substances.
If inflammable substances come into contact with electrical parts inside the machine, it
may result in a fire or electrical shock.
• Do not block or cover the ventilation port or any openings on the machine with objects,
as this may result in a fire.
• Place the machine on a flat, stable, vibration-free surface that is strong enough to
support its weight (approx. 14.5 kg PC-D320, 16.0 kg PC-D340, 16.1 kg FAX-L400).
• Make sure the area is free from dust.
• Avoid poorly ventilated locations.
During use, the machine generates ozone. However, the amount of ozone generated is not
enough to affect the human body. Nevertheless, if the machine is used for a prolonged
period of time in a poorly ventilated room, or when making a large quantity of prints, be
sure to ventilate the room to make the working environment as comfortable as possible.
• Do not install the machine near devices that contain magnets or generate magnetic fields,
such as speakers.
• Make sure the machine is approximately 10 cm away from walls and other equipment for
proper ventilation.