Canon PC-D320 - Manual (Page 63)

7-1
7
Ma
in
ten
ance
Chapter 7
Maintenance
Periodic Cleaning
Your machine requires little periodic maintenance. This section describes the necessary cleaning procedures for your machine.
• When cleaning the machine’s exterior or the platen glass, be sure to disconnect the power cord before cleaning the machine.
• For the model with the fax function, print any received faxes stored in memory before disconnecting the power cord, since
documents in memory are backed up only for about 1 hour when the power cord is disconnected. (
→
Facsimile Guide)
• Do not use tissue paper, paper towels, or similar materials for cleaning; they can stick to the components or generate static
charges.
Use a soft cloth to avoid scratching the components.
• Never use volatile liquids such as thinner, benzene, acetone, or any other chemical cleaner to clean the interior of the machine;
these can damage the machine’s components.
■ Cleaning the Exterior
Wipe the machine’s exterior with a clean, soft, lint-free cloth moistened with water or diluted dishwashing detergent solution.
■ Cleaning the Scanning Area
Wipe the scanning area (shaded area) with a clean, soft, lint-free cloth moistened with water, then wipe with a clean, soft, dry,
lint-free cloth.
Platen glass cover
Platen glass