Canon PC-D320 - Manual (Page 86)

8-12
Copying Problems
❚ The machine will not make a copy.
The cartridge may not be installed properly.
• Make sure the cartridge is installed properly. (
→ Set-up Guide)
The sealing tape may not be removed from the cartridge.
• Remove the sealing tape from the cartridge. (
→
Set-up Guide)
The cassette may not be inserted completely into the machine.
• Insert the cassette as far as it will go. (
→ Set-up Guide)
The document may not have been loaded correctly.
• Remove the document, stack it if necessary, and load it in the ADF correctly. (
→
p. 3-4)
• Make sure the ADF is closed.
❚ MEMORY FULL and PRESS OK KEY or MAKING SPACE IN MEM appears in the LCD when making
copies of a multiple page document.
Paper in the cassette or multi-purpose tray may be run out.
• If there is no paper and the machine’s memory becomes full during copying,
MAKING SPACE IN MEM and SUPPLY REC.
PAPER are displayed alternately. If paper is loaded, the copying resumes automatically.
The document you are copying may have too many graphics or photos.
• When making copies of such documents, separate the documents into smaller stacks or feed them one by one.
The machine’s memory is full.
• Print or delete any documents stored in memory to free up space in the machine’s memory, then start again.
❚ If the documents have black streaks or appear dirty after you feed them in the ADF.
The read area of the platen glass is dirty.
• Clean the read area of the platen glass. (
→ p. 7-2)
• For additional troubleshooting → Print Quality Problems.