Cancelling the copy job, Cancelling the copy job -2 – Canon PC-D320 User Manual
Page 44
5-2
4
Press
Start
to begin copying.
• If the paper in the cassette or multi-purpose tray runs out during copying, the
LCD displays
SUPPLY REC. PAPER
. Load paper in the cassette or multi-
purpose tray. When paper is loaded, the machine automatically resumes copying.
• If you load paper while making copies, do not load a different paper size.
• You can reserve the next copy job while the machine is outputting copies. (
• After the machine finishes copying, the setting will remain. However, if you press
Stop/Reset
or if no key is pressed for 2 minutes, they will be reset to the default
setting. (The time until the machine enters the AUTO CLEAR mode can be
specified. (
• The capacity of the output tray is 50 sheets (80 g/m
2
) of paper. To prevent paper
jams, remove paper from the output tray before the count reaches 50.
■
Cancelling the Copy Job
■
While Scanning Documents in the ADF (Only for the PC-D340/FAX-L400
Models)
1
Press
Stop/Reset
.
2
Press
OK
.
• The document that has stopped in the ADF will come out.
■
After Scanning Documents
1
Press
Stop/Reset
.
2
Press
(–)
for
YES
.
Ex:
SCANNING
COPY NO. 0001
STOP KEY PRESSED
PRESS OK KEY
CANCEL COPYING?
<YES NO>