Printing problems, Printing problems -14 – Canon PC-D320 User Manual
Page 88
8-14
❚ The copy images are partly missing or shaded when you make copies on thick paper.
PAPER TYPE
of
PAPER SETTINGS
of the Additional Functions may not be set correctly.
• Select
SPECIAL PAPER 1
in
PAPER TYPE
. (
→
❚ The copy images are missing when you make copies on rough paper.
PAPER TYPE
of
PAPER SETTINGS
of the Additional Functions may not be set correctly.
• Select
SPECIAL PAPER 2
in
PAPER TYPE
. (
→
❚ The copy images are missing when you make copies using the 2 on 1 function.
The documents may not be the A4-size.
• Be sure to use two sheets of A4-size documents when you make copies using the 2 on 1 function.
❚ The edges of copies are dirty when you make copies.
PAPER SIZE
of
PAPER SETTINGS
of the Additional Functions may not be set correctly.
• Specify the appropriate paper size in
PAPER SIZE
. (
→
Printing Problems
❚ The Alarm indicator comes on.
The machine may have a paper jam, or there may be no paper in the cassette or multi-purpose tray.
• Clear the paper jam, or load paper in the cassette or multi-purpose tray. (
→
• If the machine has no paper jam, or paper is loaded in the cassette or multi-purpose tray, unplug the machine and wait approx.
3 minutes to 5 minutes, then plug it in again. If the problem is fixed, the Alarm indicator will turn off, and the LCD will return
to standby mode. If the Alarm indicator remains lit, unplug the machine, and call your service representative.
❚ Printout does not match paper size.
Paper may not be loaded and aligned correctly in the cassette or multi-purpose tray.
• Make sure the paper is loaded and aligned correctly. (
→