Set_log_dir, Set_max_fwd_mux – Axesstel PST User Manual
Page 103
AXESSTEL Software User's Guide
Contents
current RSSI and the last recorded RSSI value is greater than the
RSSI sensitivity setting, the system unit will be notified, and the last
RSSI value will be updated as current RSSI. The default sensitivity
for CDMA and analog is 3 dB. The RSSI range of CDMA and analog
is not set by default.
Example
set_ext_rssi {12, , 1, 1, 80, 100, 1, 85, 115}
Script Command List
Response
Sets the RSSI sensitivity parameters to one and maintains threshold
levels at their norm.
SET_LOG_DIR
Sets the directory where log files are written, either permanently or
temporarily.
Syntax
set_log_dir
“logging_directory_path” [TEMPORARY]
Example
set_log_dir “c:\PST_log\just4now” TEMPORARY
Response
Sets the logging directory to the specified directory until the script
finishes running.
SET_MAX_FWD_MUX
Sets the maximum number of supplemental channels. This
command is for MDR targets only.
Syntax
set_max_fwd_mux service_option max_num_sup_ch
service_option
is a code representing the type of transmission for
which you are setting a maximum number of supplemental
channels, as described in the following table.
Code Description
0 None
1 IS-96 Voice
2 8K Loopback
3 Old 8K Markov
4 Data
5 IS-96A Voice
6 13K (MSM2 only) Voice call
7 13K (MSM2 only) Markov call (new)
8 New 8K Markov
9 13K Loopback
10 13K (MSM2 only) Markov call (old)
11 EVRC voice option
AXESSTEL Proprietary
103