Pcm_lb, Peek, Phone_state – Axesstel PST User Manual
Page 93: Pilot_sets
AXESSTEL Software User's Guide
Contents
Syntax
pause
Example
pause
Response
A dialog box with the text “Paused ! Press Enter or click
the OK Button” opens. The execution of the script is suspended
till the user closes this dialog box.
PCM_LB
Turns the Vocoder PCM Loop Back on or off. This mode feeds
samples from the address codec back to the codec effectively looping
microphone audio to the handset (or other) speaker.
Syntax
pcm_lb
on | off
Example
pcm_lb off
Response
The Vocoder PCM Loop Back turns off.
PEEK
This command causes PST to ask the subscriber station for the
contents of a specified region of its memory up to 16 bytes at a time.
Syntax
peek
byte | word | dword | nv_byte | nv_word | nv_dword | voc
addr length
Example
peek byte 0040:0000 4
Response
Peeks at the 4 bytes starting at memory address 0040:0000.
PHONE_STATE
Requests the current phone state (analog, CDMA), displays state
and event count, which is a count of the number of handoffs, and
other state-significant events. Possible phone states are:
_
No Service
_
Analog States: Initialization, Idle, Voice Channel Initialization,
Waiting for Order, Waiting for Answer, Conversation, Release,
System Access
_
CDMA States: Initialization, Idle, Voice Channel Initialization,
Waiting for Order, Waiting for Answer, Conversation, Release,
Update Overhead Information, Mobile Station Origination
Attempt, Page Response, Order/Message Response,
Registration Access, Message Transmission
Syntax
phone_state
PILOT_SETS
Requests current pilot sets information (members of active,
candidate, neighbor sets, PN offset, strength)
AXESSTEL Proprietary
93