Axesstel PST User Manual
Page 84
AXESSTEL Software User's Guide
Contents
Blink Rate: 0500
The special characters are mapped characters on the mobile phones.
At this time, PST does not interpret them into anything readable.
GET_SMS
Requests the most recent SMS message and provides options for
deleting SMS messages. This command is for Module targets only.
Syntax get_sms erase_code
erase_code
can be any of the following:
Example
get_sms 0
Response
Retrieves the latest SMS message and does not delete any messages.
GPS_LAST_PKT
As part of the GPS receiver configuration, this command is used to
set the last packet in the burst from the GPS receiver. The packet
name is given in quotation marks. This setting is only good while
PST is running. The information is lost when you exit PST.
Syntax gps_last_pkt
“packet_name”
Example
gps_last_pkt “vtg”
Response
The vtg message is set as the last one in a burst.
Code Definition/Value
0 Do not delete any SMS messages
1 Delete all SMS text messages
2 Delete the most recently accessed SMS text message
3 Delete the oldest accessed SMS text message
4 Delete all SMS voice messages
5 Delete the most recent SMS voice message
6 Delete the oldest SMS voice message
7 Delete all SMS messages
Script Command List
HELP
Displays a brief description of the command syntax. If entered with
no argument, all commands are listed with help text. If the topic
option is used, an explanation of only that topic is displayed.
Syntax help
[topic]
Example 1
help
Response
All commands with topic options are displayed.
Example 2
help NV
AXESSTEL Proprietary
84