Axesstel PST User Manual
Page 77
AXESSTEL Software User's Guide
Contents
Response
Writes a PRL instructing NAM 1 to look for CDMA cellular service
on channel 777, CDMA PCS service on channel 500, or B-side AMPS
service.
Script Command List
AUDIO_CONTROL
Allows control of various audio characteristics of the module. This
command is for Module targets only.
Syntax audio_control
{audio_command_code, [arg_1,...arg_8]}
The following table lists the possible values for audio_command_code
and the arguments required or available for each code.
Code Definition/Arguments
0 Set audio path and muting
arg_1
=audio path: 0=no path, 1=handset path, 2=external path
arg_2
=mute output path: 0=no, 1=yes
arg_3
=mute input path: 0=no, 1=yes
1 Set voice volume
arg_1
=volume level for handset: 0–7
arg_2
=volume level for hands-free kit (HFK) speaker: 0–7
2 Set ringer volume
arg_1
=volume level for handset: 0–7
arg_2
=volume level for hands-free kit (HFK) speaker: 0–7
3 DTMF start
arg_1
=tone
possible values
4 DTMF stop (no arguments)
5 Tone start
arg_1
=tone definition
possible values
arg_2
=duration (in milliseconds)
arg_3
=audio path: 0=no path, 1=handset path, 2=external path
arg_4
=sound class: 1=beep, 2=voice beep, 3=voice
arg_5
=volume for handset: 0–3 for beep or voice beep, 0–7 for voice
arg_6
=volume level for hands-free kit (HFK) speaker: 0–7 for beep or
voice beep, 0–3 for voice
arg_7
=DTMF path: 0=play locally, 1=transmit, 2=play locally and
transmit, 3=mute
AXESSTEL Proprietary
77