Axesstel PST - Manual (Page 82)

AXESSTEL Software User's Guide Contents
Syntax dipsw [value]
Example dipsw 0xFFFF
Response This turns on all of the DIP switches.
DP_READ
Creates a dialing plan file for WLL phones by reading from the
specified NAM.
Syntax dp_read nam file_string
Example dp_read 1 dialplan.bin
Response The dialing plan for NAM 2 is written to a file named dialplan.bin.
DP_WRITE
For WLL phones, loads a dialing plan, created by a dialing plan tool,
to the specified NAM.
Syntax dp_write nam file_string
Example
dp_write 1 dialplan.bin
Response
The dialing plan in a file named dialplan.bin is written to NAM 2.
DTMF (analog test command)
Activates the DTMF generator with a digit, where digit is 1–9, 0,*,#,
or off.
Syntax dtmf [digit]
Example dtmf 0
ERR_CLR
Clears one or all of the errors in the NV memory. If item is 0xFF, it
clears all errors, otherwise it clears that one entry.
Syntax err_clr [item]
Example err_clr 0xFF
Response All errors in non-volatile (NV) memory are cleared.
Note
The only time this command might be used is at the beginning of a test run. It is
suggested that at the end of the test run, the ERR_GET command may be used
to retrieve any errors that occurred during the test run.
ERR_GET
Reads all the errors in the NV memory and displays them.
Syntax err_get
Example err_get
Response The total logged messages: 0002
The total ignored messages: 0041
FEATURE_QUERY
AXESSTEL Proprietary
82