Axesstel PST User Manual
Page 79
AXESSTEL Software User's Guide
Contents
Syntax cdata byte1
, byte2, byte3... (where byte is 1 byte)
Example
cdata 1 2 3 4 5 6
Response
Data is transmitted in message on the reverse control channel.
CDMA_RSSI
Requests the current CDMA RSSI value. This command is for
Module targets only.
Syntax cdma_rssi
CLOSELOG
Closes the currently open transcript file. If no transcript file is open,
a message informing the user of that fact is displayed.
Syntax closelog
See also
openlog
append_log
CLS
Clears the CAIT display screen.
Syntax cls
COMP (analog test command)
Turns the compander (compressor/ expander) on or off.
Syntax comp
on | off
Example
comp on
Response
Turns the compander on.
CWAIT
Halts scripting for a specified duration.
Syntax cwait centiseconds
Example
cwait 300
Response
Halts scripting for three seconds.
DATA_PARM_GET
Requests statistics regarding a specific data protocol from CST
phones like the QSec™-800. Available protocols are Radio Link
Protocol (RLP), Point to Point Protocol (PPP), Internet Protocol (IP),
Transport Control Protocol (TCP), User Datagram Protocol (UDP),
Real Time Protocol (RTP), Compressed Real Time Protocol (CRTP).
Specify ALL to return statistics for all supported protocols.
Syntax data_parm_get
RLP | PPP | IP | TCP | UDP | RTP | CRTP | ALL
Example
data_parm_get IP
Response
The command returns the following Internet Protocol statistics:
AXESSTEL Proprietary
79