Axesstel PST - Manual (Page 46)

AXESSTEL Software User's Guide Contents
However, Roaming List Editor does not permit you to skip columns in this table.
If you skip a channel, or if you fail to select an acquisition type for a row, a warning is
displayed when you attempt to save the file.
To add another acquisition record, Double -click in the firt colunm area in aquistion
table and input value of row
in num_acq_rec
.
Select an acquisition type for that record as before and continue specifying the
channels
Editing records
To delete a record, double-click the first column in the selecting row
and click
Delete Record(s)
from pop-up
To insert a record, double-click in the first row
and click
Insert Record
from pop-up
NOTE
The Cut, Copy, and Delete commands apply to the record level, not to fields within
a record, even if only one field appears to be selected.
For deleting all record, click
Clear
Other fields in the records are not affected
4.6.3 System record table (system types)
The lower region of the Edit mode screen defines system types
Use the system record table to provide settings that will enable specified acquisition
types to find a
system.
The system record table must include at least one completely filled-in row of data
corresponding to a
record entry in the acquisition record table.
Every system record must refer, by acquisition index number, to a record in the
acquisition record table.
However, not all acquisition records need corresponding system records.
Roaming List Editor defines permissible values for these data depending on the
acquisition type. If you input an incorrect entry, a warning displays, giving the allowed
range for that field. You cannot
leave the field until you have corrected it.
You can use acquisition records more than once. You can also create a roaming list
with as little as one acquisition record entry and one system record entry. You can also
create a roaming list as large
as the phone permits.
AXESSTEL Proprietary
46