Pr_list_wr, Print, Rcversus1 (analog test command) – Axesstel PST User Manual
Page 95: Rcvs1 (analog test command), Rssi (analog test command)
AXESSTEL Software User's Guide
Contents
names the file that the PR list will be read into. If the file already
exists, it will be overwritten. If it does not exist, it will be created in
the format readable by the offline Axesstel Preferred Roaming
List Print Tool (print PRL). It is the same format to be written to the
phone using the pr_list_wr command or the Product Support Tool
(PST) for phones supporting PCS mode.
Syntax
pr_list_rd nam
“filename”
Example
pr_list_rd 0 “nam1prl.bin”
Response
The list is printed to a file named nam1prl.bin.
PR_LIST_WR
Allows the user to write a Preferred Roaming List (PRL) file to the
phone. The NAM parameter specifies which NAM the PRL should
be written to. The filename must be given in quotation marks and
must be a file that was previously read from a phone using the
pr_list_rd command, read from a phone using the PST, or created
using the AXESSTEL Roaming List Generator (RLG) for phones
supporting PCS mode.
Syntax
pr_list_wr nam
“filename”
Example
pr_list_wr 0 “nam1prl.bin”
Response
The nam1prl.bin list is sent to the mobile phone.
Prints a line on the display window.
Syntax
“text”
Example
print “Next we will test the symbol error rate”
Response
The string
“Next we will test the symbol error rate”
is printed
on the display screen. The quotation marks delimit the string.
RCVERSUS1 (analog test command)
Returns the message count on the analog control channel.
Syntax
rcversus1
RCVS1 (analog test command)
Returns the message count on the analog control channel. Shorthand
for rcversus1.
Syntax
rcvs1
RSSI (analog test command)
Returns the current analog RSSI measurement.
Syntax
RSSI
AXESSTEL Proprietary
95