C. Crane BC75XLT - Manual (Page 11)

11
PC Programming - lets you program your scanner using
your PC.
Custom Search - lets you program up to 10 custom search
ranges and search any or all of those ranges.
Quick Search - allows you to enter a frequency and start
searching up or down from that frequency.
Turbo Search - increases the search speed from 100 to 300
steps per second automatically for bands with 5 kHz steps.
Search Lockout - allows you to lock out up to 200 search
frequencies (100 temporary and 100 permenant) in Custom,
Service, Close Call, or Quick Search modes.
Lock-Out Function - lets you set your scanner to skip
over specified channels or frequencies when scanning or
searching. You must manually unlock these channels.
Temporary Lock-Out Function - lets you set your scanner to
skip over specified channels or frequencies when scanning
or searching. This temporary lock-out releases when you
manually unlock the channels or frequencies or when you
power down the scanner.
Priority Channels - You can program one channel in each
bank (10 channels total) as a priority channel. The scanner
checks that channel every 2 seconds while it scans the
bank so you do not miss transmissions on those channels.
(default=Priority Off)
Priority Scan - lets you set the Priority feature to check each
channel every 2 seconds regardless of whether or not the
scanner is receiving transmissions.