C. Crane BC75XLT - Manual (Page 54)

54
• if the scanner receives strong interference or electrical
noise, move it away from the source of the noise. if
possible, a higher elevation might provide better
reception.
CLEANING
keep the scanner dry. if it gets wet, wipe it dry immediately.
Use and store the scanner only in normal temperature
environments. Handle the scanner carefully: do not drop it.
keep the scanner away from dust and dirt, and wipe it with a
damp cloth occasionally.
• disconnect the power to the unit before cleaning.
• Clean the outside of the scanner with a mild detergent.
• To prevent scratches, do not use abrasive cleaners or
solvents. Be careful not to rub the LCd window.
• do not use excessive amounts of water.
REPAIRS
do not attempt any repair. The scanner contains no user
serviceable parts. Contact the Uniden Customer Service
Center or take it to a qualified repair technician.
bIRDIES
All radios can receive “birdies” (undesired signals). if your
scanner stops during Scan mode and no sound is heard, it
might be receiving a birdie. Birdies are internally generated
signals inherent in the electronics of the receiver.
Press L/O to lock out the channel, then press Scan to resume
scanning.