C. Crane BC75XLT - Manual (Page 35)

35
OPERATION
SEARCHING
The BC75XLT has 10 preset search ranges that display as 1 -
10 across the top of the screen when you press Srch. it also
has 10 preset service bands that display in two rows across
the bottom of the screen when you press Func + Svc.
Note: Service Search is discussed on page 37.
When you press Srch, the BC75XLT begins searching the
search ranges until it finds activity. The search range number
flashes and it remains on that frequency until activity ends.
Press Srch at any time to continue.
Press a search range’s corresponding number to turn it off
and back on. For example, press 4 to turn search range #4
off. The number
4 will no longer display across the top of the
screen.
You can search these ranges through:
• Quick Search - designate a starting point to search from.
• Custom Search - designate and store upper and lower
frequency limits for each of 10 search ranges. The
scanner searches within this range.
Quick Search
Quick Search lets you designate a starting point for
searching. Once you are searching from this point, you can
stop the search and store frequencies in a channel.
1. if the scanner is scanning or searching, press Hold.
2. Enter the frequency using the number and . Clr keys.
The scanner automatically rounds the entered number