C. Crane BC75XLT - Manual (Page 38)

38
STORING FREQUENCIES
To store frequencies in the first available channel:
1. Press Hold.
2. Enter the frequency and press Hold and Func + Pgm .
3. The scanner alternates between the frequency you are
stopped on and the first available channel number with
no frequency stored. Press E.
4. The scanner is now on that frequency, on Hold with the
delay function automatically turned on (see page 47).
Press Srch or Scan again to continue.
Note: Refer to www.radioreference.com for a list of frequencies
in your area.
You can also store frequencies directly into a specific channel
in a specific channel bank.
1. From Search or Scan modes, press Hold.
2. Press Func + Pgm. The scanner displays the next
available channel number and alternates between O and
the frequency you’re holding on.
3. Press Func and turn the scroll control knob to change
channel banks if desired; press Func again to select that
channel bank.
4. Turn the scroll control knob to change channels within
that bank.
5. Press E to store the frequency in the displayed channel/
channel bank.
6. The scanner is now on that frequency, on Hold with the
delay function automatically turned on (see page 47).