C. Crane BC75XLT - Manual (Page 36)

36
to the nearest valid frequency. For example, if you enter
151.473 (MHz), your scanner accepts it as 151.475.
However, if you enter a frequency that is out of range,
the scanner sounds an error tone and
Error appears.
Enter another frequency.
3. Press Srch. The scanner searches, starting from the
frequency you just entered. (Turn the scroll control
knob to change the search direction.) The scanner also
automatically turns on the delay function;
DLY displays.
To turn off the function, press Func + Dly (see page 47).
Custom Search
You can adjust each preset search range’s upper and lower
frequency limits.
1. Press Func + Psrc. The scanner enters Custom Search
mode and displays SRCH and PGM . The upper and
lower frequencies for Custom Search range 1 alternate.
2. Turn the scroll control knob to scroll through the rest
of Custom Search ranges until you find the one you
want. The search range numbers at the top of the screen
change as you cycle through them.
3. Enter the lower limit frequency and press E . The
frequency range flashes with the adjusted lower limit
frequency.
4. Enter the upper limit frequency and press E . The
adjusted frequency range flashes with the adjusted
upper limit frequency (both upper and lower
frequencies are now adjusted).