C. Crane BC75XLT - Manual (Page 47)

47
every 2 seconds only when it is not receiving
transmissions.
• Priority Scan (
PRI
displays) : The scanner checks
Priority channels every 2 seconds regardless of whether
or not it is receiving a transmission.
You can designate one channel in each bank as a priority
channel (10 total). The first channel in each bank is the
default Priority channel.
Follow these steps to select a different channel in a bank as
the priority channel.
1. Manually select the channel you want for the Priority
channel.
2. Press Func + Pgm, then press Func + Pri. P appears to
the left of the selected channel number.
3. repeat Steps 1 and 2 for other channels for each bank
you want to program as a priority channel.
From Scan Hold mode, press Func + Pri to cycle through the
Priority options.
DELAY
Sometimes a user might pause before replying to a
transmission. To avoid missing a reply on a specific channel,
you can program a 2-second delay into channels or searches.
The scanner continues to monitor the channel frequency for
an additional 2 seconds after the transmission stops before
resuming scanning or searching.
Mode Delay Specification
Scan Each channel can be set individually.