CANOGA PERKINS 9145 Network Interface Device - Manual (Page 22)

3-4 9145 Network Interface Device
Use these keys to navigate the screens:
• Space bar When a menu item is highlighted, press <Space> to cycle through all
options for that item.
• Tab Press <Tab> to move the highlight to the next column to the right.
• Enter Press <Enter> to select the highlighted option for a menu item.
• Escape Press <Esc> once to cancel changes for the selected item or to return to
the previous screen; press <Esc> two or more times to return to the Main Menu
from two or more menu levels deep.
User Interface Organization
The user interface consists of selectable, nested screens, available in this order; this
chapter describes how to use these screens:
Main Menu
System Configuration
1.1. IP/SNMP Agent Configuration
1.1.1. Management IP Configuration
1.1.2. Auxiliary IP Configuration
1.1.3. Host Table
1.1.4. Trap Table
1.2. Trap Configuration
1.3. Security Configuration
1.4. Account Configuration
1.5. System Information
1.6. Radius Client Configuration
1.7. SNTP Client Configuration
1.8. SYSLOG Client Configuration
1.9. Hardware Information
Diagnostics
2.1. Loopback Setup
2.2. Latency/Jitter Test
2.3. PING Generation
2.4. Network Performance Assurance (Optional feature, NPA Manual)