CANOGA PERKINS 9145 Network Interface Device - Manual (Page 37)

9145 Network Interface Device 3-19
Manual Configuration – VT-100 Session
The System Information screen provides various categories of optional information that system
administrators may track. To access the System Information screen, and follow these steps:
1. From the System Configuration Menu, type [ 5 ], "System Information," and press <Enter>
2. At the System Information screen, type the number for an item and press <Enter>, then
type the information and press <Enter>.
1. System Name – Displayed in the header of all 9145 Management Screen,
up to 25 characters
2. Contact – up to 25 characters
3. Location – up to 25 characters
4. Customer – up to 25 characters
5. Information – 2 lines, up to 40 characters each
6. Circuits – 2 lines, up to 25 characters each
7. Service Code – up to 10 characters
8. Date-in-Service – [mm/dd/yyyy]
9. Date-Out-of-Service – [mm/dd/yyyy]
10. Equipment Type – up to 10 characters
11. Equipment Code – up to 10 characters
12. Vendor – up to 25 characters
13. CLEI – up to 10 characters
14. Mfg Date – [mm/dd/yyyy]
15. Unit – Displays System Information for a SMBC connected remote 9145
3. To change the view between Local and Remote units, type [ 15 ], "Unit," press <Enter>.
Pressing <Space> cycles between the options. Press <Enter> to select an option.
4. To return to the Main Menu, press <Esc>.
Canoga Perkins Corp. Ethernet Network Interface Device 29-Nov-2006
Model 9145-5 V05.00 F96 9145 D 11:46:51
-----------------------SYSTEM INFORMATION - LOCAL UNIT--------------------------
1. System Name : 9145 D
2. Contact : Tien Nguyen
3. Location : VLAB
4. Customer : Canoga Engineering
5. Information :
:
6. Circuits :
:
7. Service Code :
8. Date-in-Service :
9. Date-Out-of-Service :
10. Equipment Type :
11. Equipment Code :
12. Vendor : FONEX
13. CLEI :
14. Mfg Date : 10/01/2004
15. Unit : Local
Select [1-15]:
------------------------------------Messages------------------------------------