CANOGA PERKINS 9145 Network Interface Device User Manual
Page 33
9145 Network Interface Device
3-15
• ConfigureIPAddress specifies whether the 9145 will adopt or ignore the following
configuration file parameters:
IPAddress
SubnetMask
DefaultGateway
Slip/PPP IPAddress
The default setting for ConfigureIPAddress is “No”, which indicates that the values
for each of the above parameters will be ignored.
ConfigureSBMC specifies whether the 9145 will adopt or ignore the SBMC Flag
parameter. The default is set to “No”, which indicates that the value is ignored.
ConfigureInterface specifies whether the 9145 will adopt or ignore the following
physical port setup parameters:
RmtfFlag
LlfFlag
FlowControlFlag
UserPort
ExtPort
sbmcFlag
PvstFilterFlag
The default is set to “No”, which indicates that the value is ignored.