CANOGA PERKINS 9145 Network Interface Device User Manual
Page 35
9145 Network Interface Device
3-17
5. Type [dir] on the prompt to view the contents of the directory and press <enter>
6. To retrieve the configuration file, type [get 9145.CFG] and press <enter>
7. To end the ftp session, type [bye] on the prompt and close the window.
You can use any text editor such as Notepad
1
or WordPad
2
to edit the configuration file. Please
see Appendix C for an example format and the different fields of a configuration file.
Once you have made your changes to the configuration file and are now ready to download the
changes to the 9145, follow these steps:
1. Open a command prompt on your PC and type [ftp xxx.xxx.xxx.xxx] where the x’s
are is the IP address corresponding to the 9145’s management IP address and press
<enter>.
1
2
Notepad and WordPad are trademarks of Microsoft Corporation