CANOGA PERKINS 9145 Network Interface Device - Manual (Page 65)

9145 Network Interface Device 3-47
2. To configure VLAN Tagging rules, type [ 1 ], "VLAN Rules," and press <Enter>."
3. At the VLAN Rules Menu, type the number for an item and press <Enter>. Pressing
<Space> cycles through the options for that item, pressing <Enter> selects the option.
Pressing <Tab> moves between User Port and Ext Port columns. When connected to a
remote 9145 and SBMC is enabled, you can configure options on the remote 9145.
1. Drop Untagged Packets?
The 9145 will discard all user traffic that does not have a VLAN Tag. Yes discards
packets, No does not.
2. Drop Packets with VLAN Tag not matching VLAN Tag A?
The 9145 discards all user traffic that does not have a VLAN Tag matching to VLAN
Tag A (menu item 7). Yes discards packets, No does not.
3. Remove outermost VLAN Tag?
Removes the outer-most VLAN Tag. Takes no action on untagged packets. Yes
removes outermost tag, No does not.
4. Add VLAN Tag B to Untagged Packets only?
Adds VLAN Tag B (item 8 below) to all untagged packets. Yes add tags, No does
not.
5. Add VLAN tag C to tagged packets only?
Adds VLAN Tag C (item 9 below) to all untagged packets. Yes add tags, No does
not.
6. Add VLAN Tag C to Tagged Packets only using P-Bits of outermost VLAN
tag?
Adds VLAN Tag B (item 8 below) to all untagged packets, using the Priority Bit
setting of the user’s packet (if tagged), overriding the VLAN Tag C’s Priority Bit
setting. Yes add tags with user P-Bit setting, No does not.
7. Tag A VLAN ID (0-4095)
Sets VLAN ID for Tag A. ID setting of 0 – 4095 are valid.
8.
Tag B VLAN ID (0-4095)
Sets VLAN ID for Tag B. ID setting of 0 – 4095 are valid.
Canoga Perkins Corp. Ethernet Network Interface Device 04-Dec-2006
Model 9145-5 V96.05 F96 9145 DC_172.16.142.225 07:01:20
----------------------------------VLAN RULES------------------------------------
Local Local Remote
User Port Ext Port Offline
1) Drop Untagged Packets? No No
2) Drop Packets with VLAN Tag
not matching VLAN Tag A? No No
3) Remove outermost VLAN Tag? No No
4) Add VLAN Tag B to Untagged
Packets only? No No
5) Add VLAN Tag C to Tagged
Packets only? No No
6) Add VLAN Tag C to Tagged
Packets only using P-Bits
of outermost VLAN tag? No No
7) Tag A VLAN ID (0 - 4095) 0 0
8) Tag B VLAN ID (0 - 4095) 0 0
Priority (0 - 7) 0 0
9) Tag C VLAN ID (0 - 4095) 0 0
Priority (0 - 7) 0 0
Select [1-9]:
------------------------------------Messages------------------------------------