CANOGA PERKINS 9145 Network Interface Device - Manual (Page 62)

3-44 9145 Network Interface Device
To configure 9145 ports, follow these steps:
1. From the Main Menu type [ 3 ], "Port Information," and press <Enter>. At the Port Information
Menu, type [ 2 ], "Port Configuration," and press <Enter>.
2. At the Port Configuration Menu, type [ 2 ], "Functional Configuration," and press <Enter>.
Canoga Perkins Corp. Ethernet Network Interface Device 04-Dec-2006
Model 9145-5 V96.05 F96 9145 DC_172.16.142.225 06:59:22
-------------------------------PORT CONFIGURATION-------------------------------
1) Hardware Information
2) Functional Configuration
3) VLAN Configuration
4) Port Filters
Select [1-4]:
------------------------------------Messages------------------------------------
Canoga Perkins Corp. Ethernet Network Interface Device 04-Dec-2006
Model 9145-5 V96.05 F96 9145 DC_172.16.142.225 07:00:31
----------------------------------FUNCTIONAL CONFIGURATION----------------------
Local Remote
Offline
User Port Speed/Duplex 100M/Half
Ext Port Speed/Duplex 1000M/Full
1) User Port Setting Autonegotiate
2) Ext Port Setting Autonegotiate
3) RMTF Disabled
4) Link Loss Fwd Disabled
5) Flow Control Disabled
6) Maximum Frame Size 10000
7) Sideband Management Disabled
Select [1-7]:
------------------------------------Messages------------------------------------