CANOGA PERKINS 9145 Network Interface Device - Manual (Page 74)

3-56 9145 Network Interface Device
2. At the prompt, type [ 1 ] to add a port, or type [ 2 ] to delete a port. Enter the IP Address
(xxx.xxx.xxx.xxx), MAC Address (xx.xx.xx.xx.) and the Port (press <space> to select User or
Ext).
3. To return to the Main Menu, press <Esc>.
To display the dynamic ARP Table, follow these steps:
1. From the Utilities Menu, type [ 8 ], "Dynamic ARP Table," and press <Enter>.
2. <F>irst, <N>ext, <P>rev and <L>ast displays various pages of the table when the number of
entries exceed 1 or more screen. To Delete an entry in the Table, page until the address
appears on the screen, they type [
D ] and press <enter>. The first entry on the screen will be
highlighted. Press <space> until the address to delete is highlighted and press <enter>.
3. To return to the Main Menu, press <Esc>.
Canoga Perkins Corp. Ethernet Network Interface Device 04-Dec-2006
Model 9145-5 V96.05 F96 9145 DC_172.16.142.225 07:35:10
------------------------------------DYNAMIC ARP TABLE---------------------------
IP Address MAC Address Port IP Address MAC Address Port
---------- ----------- ---- ---------- ----------- ----
172.16.14.204 00-16-76-13-4A-88 User
172.16.1.10 00-07-E9-20-03-48 User
172.16.240.4 00-07-E9-20-03-48 User
Select [(F)irst, (N)ext, (P)rev, (L)ast, (D)elete]:
------------------------------------Messages------------------------------------