Leica Geosystems GPS System 500 - Technical Reference Manual User Manual
Technical reference manual gps system 500
Advertising
Table of contents
Document Outline
- 1. Introduction
- 2. Equipment Set Up and Connection
- 2.1 GPS Receiver ports
- 2.2 Equipment Setup - Post Processed Static/Rapid Static/Reference on Pillar
- 2.3 Equipment Setup - Post Processed Static/Rapid Static/Reference on Tripod
- 2.4 Equipment Setup - Post Processed Kinematic, Minipack and Pole
- 2.5 Equipment Setup - Post Processed Kinematic, All on Pole, Direct Clip of TR500 on to Sensor
- 2.6 Equipment Setup - Post Processed Kinematic, All on Pole, TR500 and Sensor separated
- 2.7 Equipment Setup - Real Time Reference, single tripod
- 2.8 Equipment Setup - Real-Time Reference, Two Tripods
- 2.9 Equipment Setup - Real-Time Rover, Pole and Minipack
- 2.10 Equipment Setup - Real-Time Rover, All on Pole, direct clip of TR500 on to Sensor
- 2.11 Equipment Setup - Real-Time Rover, All on Pole, TR500 and Sensor separated
- 2.12 Equipment Setup - Real Time Rover, GIS Rover
- 2.13 Equipment Setup - Repeater Station and Repeater Box
- 2.14 Using the Minipack
- 2.15 Measuring Antenna Heights
- 3. Using System 500 without a Terminal
- 4. TR500 Terminal Overview
- 5. Configuring the Receiver
- 6. Jobs and Points
- 7. Measuring with System 500
- 7.1 Static and Rapid Static Survey, Post-Processed Kinematic Reference
- 7.2 Post-processed Kinematic Survey (Rover)
- 7.3 Real-Time Reference Stations
- 7.4 Real-Time Rover, Surveying New Points
- 7.5 Real-Time Rover, Staking Out
- 7.5.1 Entering Stakeout
- 7.5.2 Stake-Out Types
- 7.5.3 The Stake-Out Screen
- 7.5.4 Orientation
- 7.5.5 Polar and Orthogonal
- 7.5.6 Using the Reverse function
- 7.5.7 Using the Redraw function
- 7.5.8 Picking up a new point
- 7.5.9 Using the INIT key
- 7.5.10 Using the NEAR key
- 7.5.11 Graph
- 7.5.12 Aux Pt
- 7.5.13 Point Stake-Out - Procedure
- 7.5.14 Slope Stake-Out - Procedure
- 7.5.15 Grid Stake-Out - Procedure
- 8. Coding
- 9. The CONFIG Key
- 9.1 Survey - Satellite
- 9.2 General - Units
- 9.3 General - Language
- 9.4 General - Hot Keys
- 9.5 General - Time and Initial Position
- 9.6 General - Start-Up
- 9.7 General - TR500
- 9.8 General - Identification
- 9.9 Interfaces
- 9.10 Interfaces - Real-Time
- 9.11 Interfaces - NMEA Output
- 9.12 Interfaces - ASCII Input
- 9.13 Interfaces - Hidden Point
- 9.14 Interfaces - GSI/User Out
- 9.15 Interfaces - Remote
- 9.16 Interfaces - PPS Out
- 9.17 Interfaces - Event Input
- 10. Status
- 11. Applications
- 12. Utilities
- 13. Transfer
- 13.1 Job
- 13.2 Config Set
- 13.3 Coordinate System
- 13.4 Antenna Info
- 13.5 Codelist
- 13.6 ASCII/GSI to Job
- 13.7 GSI / User
- 13.8 Geoid Field File
- 13.9 CSCS Field File
- 13.10 Firmware
- 13.11 Firmware TR500
- 13.12 Language Version
- 13.13 Application Text
- 13.14 Almanac
- 13.15 Account File
- 13.16 CFC Log Mask File
- 13.17 Beacon Station List
- 13.18 Modem/GSM Station List
- 13.19 System
- 13.20 Any File Type
- Appendix A - Operating and Storage Temperatures
- Appendix B - Observation Times
- Appendix C - Seismic Record Format
- Appendix D - Defined Line File Format
- Appendix E - NMEA Message Formats
- GGA - Global Positioning System Fix Data
- GGK - Real-Time Position with DOP
- GGK(PT) - Real-Time Position with DOP
- GGQ - Real-Time Position with CQ
- GLL - Geodetic Position - Latitude, Longitude
- GNS - GNSS Fix Data
- GSA - GPS DOP and Active Satellites
- GSV - GPS Satellites in View
- LLK - Leica Local Position and GDOP
- LLQ - Leica Local Position and Quality
- VTG - Course Over Ground and Ground Speed
- ZDA - Time and Date
- Appendix F - Pin Assignments and Sockets
- Appendix G - Data Device Directory Structure
- Appendix H - External Devices
- Appendix I - MC500
- Appendix J - RS500
- Appendix K- GS50 / GS50+ and GIS Data Collection