Leica Geosystems GPS System 500 - Technical Reference Manual - Manual (Page 229)

229 7. Measuring with System 500 Technical Reference Manual-4.0.0en
If you simply wish to add aditional text
to the suggested point Id, press
Enter. The point Id in the display
remains and the cursor will be in the
position defined in the current Point Id
template.
You may also enter a completely
different Point Id if required.
Add a code if required. Coding is
explained in Chapter 8.
Use the ADD (F5) key to add a
Hidden Point and/or Point
Annotations.
When you have the pole level, press
STOP (F1).
The DIFF (F2) key is available.
Pressing this key reveals the
differences between the design grid
point and the as staked grid point. If
you have chosen to record a LONG
log file these values will also be
stored in the log file.
Press STORE (F1) to store the point.
The next target is automatically
selected according to the increment
value. The value given in the
Directory Bar also shows this.
Carry on staking and recording points
in this way until you reach the end of
the row.
You can then choose the way in which
you wish to proceed to the next row:
1. Increase the offset and start the
next row in either direction from
the last recorded grid point.