Leica Geosystems GPS System 500 - Technical Reference Manual - Manual (Page 310)

310 13. Transfer Technical Reference Manual-4.0.0en
13. Transfer
Transfer enables you to transfer all
types of data between different data
devices on the Receiver. Transfer of
data to SKI-Pro is carried out from
within SKI-Pro.
Select Transfer from the Main Menu.
The following screen appears.
13.1 Job
Enables you to Transfer a Job be-
tween PC Card and Internal Memory.
Select From where you wish to
transfer the Job. The device To which
the Job will be transferred will auto-
matically selected.
Job - Select the Job to be trans-
ferred. Press ALL (F3) to select all
the Jobs.
MORE (F6) enables you to define
which data to transfer. Select from
Points and Obs, Points only or Obs
only.
13.2 Config Set
Enables you to transfer Configuration
Sets between Sensors and PC Cards.
Select From where you wish to
transfer the Configuration Set. The
device To which the Configuration Set
will be transferred will be automati-
cally selected.
Config Set - Select the Configuration
Set to be transferred. Press ALL (F3)
to select all the Configuration Sets.