Panasonic NAMPS HH950 User Manual
Page 102
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Keypad Sequence
Setting Ring Tone
FCN 42-—«
Ring Tone
Standard
< +, - or STO >
This feature allows selecting among three Ring Tone types
• Standard - Normal phone ring
• Dual - Two rings every three seconds
• Special - Long, widely separated rings
1 To select the ring tone, press fTcH) [^] ^
Observe the current setting appears on the display, and
the phone sounds a sample tone
FCN 42—
Ring Tone
Dual
< +, - or STO >
Use the C±D or (3) keys to scroti through the possible
settings-Standard, Dual, and Special
When the desired choice appears on the display, press
CM)
FCN 42—
Ring Tone
Special
< +, - or STO >
5 The phone automatically exits this mode after 3
seconds
FCN 42—=
Ring Tone
Standard
Set
NOTE:
You can select a different nng tone for two different
phone numbers if your phone is programmed for two
numbers (see page 3-76) Simply select the desired nng
tone when actively Vogged-on" to the proper number
Operation
Ringing (FCN 4) 3-69