Panasonic NAMPS HH950 - Manual (Page 81)

CDCZKS
□aa
□(Eia
aao
aaa
EJdUd]
Signal ===.==
02:18P 12/05
Message:
Call home
Signal
RCVD 1 Call
02:18P 12/05
FCN *: Msgs
FCN* =====
1 : CallBack 0
2:Shor'tMsg 3
Short Message
Keypad Sequence:
CED
03
(M)
Short Message feature allows recalling and displaying
actual short messages (up to 14 characters long) from the
cellular service provider system base site.
Since Short Message feature is always active when the
phone is powered ON, the phone automatically sounds fwo
beep tones and shows one of the following displays every
time a Short Message is received:
This display appears when the phone has received only
one Short Message, and no other enhanced feature
messages (Voice Mail, CLI, etc.) and/or conventional
cellular calls. In this condition, the message contains a
time/date stamp and a 14-character message. This display
remains until you press any key (except
C pwh )).
This display appears when the phone has received one or
more Short Messages along with other enhanced features
messages (such as Short Messages and CLI messages)
and/or cellular calls. This display example shows that 1
cellular call has been received, as well as one or more
enhanced feature messages as indicated by the
"FCN*:Msgs" line.
To recall multiple Short Messages, perform the following
steps:
1 . Press (M) (3 and observe the following display:
NOTE:
The number to the right of "2:
S/iorlMsg"
indicates the
number of messages received since you fast entered this
particular menu. Each time you press ”2” for ShortMsg,
the ShortMsg number column resets to "zero" the next
time you access this menu.
3-48 Enhanced Features Operation