Received call indicator, Received cali indicator -10 – Panasonic NAMPS HH950 User Manual
Page 43
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Received Call Indicator
Keypad Sequence:
To clear:
Signal
RCVD 1 Call
08:00P 12/05
ANY KEY
Received Call Indicator automatically informs you of up to
99 unanswered incoming calls in your absence by way of
the RCVD Call message.
When receiving a call while away from your phone, or if the
calling party terminates a call (or the call "drops" because of
a fading signal before you are able to answer), the handset
acknowledges and remembers the occurrence of these
recent incoming calls.
1. No key entries are necessary to activate this mode.
However, handset power must remain ON and Call
Receive feature (see page 3-89) must not be active.
2. If an unanswered call has occurred, observe the RCVD
Call message-on the display. The time and date show
when the most recent call was received. The number
of calls received but not answered appear at the bottom
of the display. The calling party’s actual number is not
displayed, nor does the phone store the number in this
mode.
3. To clear the display, press any key,
NOTE:
To recall the time of the last ten calls received but not
answered, use Caller's Memory feature.
3-10 Additional Operations
Operation