Panasonic NAMPS HH950 - Manual (Page 131)

Input
Dreplay.
Mode
' alph
Name?
□
1
.______ ____
2. First we must enter the Name Tag for Joe’s office, in
this case Joe Doe-office. To do so, enter the
Alphanumeric Input Mode by pressing . Observe
the current input display mode appears in the upper
right-hand corner of the display.
3. Press (FctD to scroll between 3 possible input display
modes:
Q Uppercase letters
O Lowercase letters
D
Numbers/symbols.
NOTE Refer to Table 3.1 (page 3-15} for a corriplete list of
available input characters.
Cursor -
fALPH
Q
^_______ _____ /
For Joe’s name, let's use both uppercase { Q )
and lowercase ( Q ) letters. Starting with
uppercase, press C±D or (H) to scroll sequentially
through the characters one at a time until you
reach "J". (For rapid scroll, press and hold the
dD f CZ) keys.)
5. Press to enter the selected letter and automatically
move the cursor over to the next column.
NOTE:
• To correct an entry mistake (or to simply move the cursor
to the left), press f to move the cursor one space at a
time to the left until the cursor is on top of the character in
error,
* To delete characters one at time, press (ciRj . To delete
the entire entry, press and hold (cmj for aboui 1 second.
6. Change to lowercase mode (press (TciiD) and continue
scrolling through the letters until you reach the letter "o"
and again press .
A-2 Example #1 Storing Names and Numbers